High pressure die casting · component page
Gimbal housing set
A gimbal housing set carries bearings on more than one axis, so bore positions relative to each other matter more than any single size. These are precision parts that are usually machined after casting.
The gimbal housing set in our gallery is high pressure die cast and shown with its assembly. We machine bores and faces in house and can assemble the set to your bill of materials.
Process, alloys and indicative ranges
| Process | HPDC |
|---|---|
| Typical wall | 2 to 4 mm, indicative |
| Alloys | ADC12, LM24 |
| Supplied | Machined parts or assembled sets |
Ranges are indicative for this kind of part. We confirm process, machine, alloy and tolerances for your design at drawing review.
Critical features and how we check them
| Bearing bores | Air gauging in house, on every part |
|---|---|
| Bore positions and alignment between axes | Fixture checks in house; CMM through a partner |
| Cosmetic surfaces | Visual inspection in house, at every stage |
| Assembly function | Assembly check in house |
Machining and finishing options
- CNC machining of bores and faces
- Ultrasonic cleaning
- Assembly to your bill of materials
Questions that sharpen your quote
- Which axes and bores are critical, and to what tolerance?
- Do you need the set assembled?
- Annual volume?
Related
Family, process and industry
Have a gimbal housing set to quote?Send the drawing and annual volume. An engineer replies within 48 hours.
Quote a part like this →